What You’ll Find Here

I’m a fulfillment specialist at Peacemaker Building Components – the people who supply hinges, handles, window frames, and garage hardware to residential contractors across the Midwest. In my role triaging rush orders for 6 years, I’ve seen the same questions pop up again and again. This FAQ covers the ones I hear most: from choosing the right door handle to double-checking Peacemaker parts before they ship, and even a few Windows shortcuts that’ll save you a call to your IT guy.

Which Peacemaker Door Handle Should I Use on a Standard Bedroom Door?

If you’re doing a straightforward interior door, the Peacemaker Colt-series privacy handle (model CP‑210) is my go-to recommendation. The barrel length – that’s the distance from the faceplate to the outside of the knob – is 2-3/8 inches on the standard version, and 2-3/4 inches for the deep‑reach model. I’ve installed both. The standard fits most 1-3/8″ doors; the longer version is for those thicker 1-3/4″ fire‑rated doors.

I should add: the Colt-series name can be confusing because of the historical revolver, but Peacemaker’s “Colt” is just their mid‑price solid‑brass line. No guns involved.

How Do I Find Umarex Colt Peacemaker Parts for My Hardware?

Wait – you’re probably mixing up brands. Umarex is an airsoft and replica firearm company. Peacemaker Building Components doesn’t make gun parts. If you actually need Umarex Colt Peacemaker airsoft parts, you’d go through Umarex’s own channel or an authorized dealer like Pyramid Air.

But if you meant Peacemaker Colt-series door parts – spring cassettes, latch assemblies, strike plates – we stock them. Call our parts hotline with the model number (CP‑210 or CP‑310) and we’ll have it shipped same‑day if you’re in a jam.

What Exactly Is a “Barrel Length” on a Door Handle?

In door hardware, “barrel length” refers to the cylindrical part of the latch mechanism that extends from the faceplate to the outside of the rose. It’s not a gun term here. Peacemaker offers two standard barrel lengths for our residential handles:

• 2-3/8" (60mm) – for doors 1-3/8" thick (most interior doors)
• 2-3/4" (70mm) – for doors 1-3/4" thick (exterior or fire‑rated)

I’ve seen contractors order the wrong size at 11 PM for a next‑morning install. The surprise wasn’t the price difference – it was that the 2-3/4" barrels wouldn’t even fit in the bore. Save that headache by checking your door thickness before you place the order.

How Do I Check Register for My Peacemaker Warranty?

Peacemaker offers a lifetime mechanical warranty on our Colt‑series and Pro‑series hardware. To register, go to peacemakerbuild.com/warranty and enter the serial number found on the back of the rose or the latch face. You’ll also need your purchase invoice. Registration usually takes 3 minutes, and it’s required for any replacement claims.

By the way – I learned this the hard way. In 2023, our company lost a $2,800 contract because a builder tried to skip registration on a batch of 50 handles. When three of them failed six months later, we couldn’t process RMA without registration. The builder ended up buying replacements at retail. 5 minutes of verification beats 5 days of correction.

How to Snip on Windows for Product Specs?

You’re probably asking how to take a screenshot of your order confirmation or our installation guide so you can save it or share it. On Windows 10 and 11:

• Win + Shift + S – Opens the Snip & Sketch tool. Drag your selection, it goes to clipboard.
• Win + PrtScn – Takes a full‑screen snip and saves it to Pictures > Screenshots.
• Alt + PrtScn – Just the active window.

I use Win + Shift + S constantly when quoting rush orders. It’s saved me from having to re-type measurements off the screen. (Should mention: you need the latest Windows update for the toolbar to show – if it doesn’t, search “Snip & Sketch” in the Start menu.)

How Do I Avoid Costly Mistakes When Ordering Peacemaker Parts?

Here’s the one question most people don’t ask until after the mistake: “What’s the total cost of my rush order, including fees?”

I’ve seen contractors save $15 on standard shipping, only to pay $85 in rush fees later when the standard delivery missed their deadline. The real cost isn’t the cheapest part – it’s the part that arrives on time and correct. My rule: always build in a 1‑day buffer if the job is time‑sensitive. That’s the cheapest insurance you’ll buy.

The numbers said the budget vendor was 12% cheaper. My gut said stick with Peacemaker because their quality control was tighter. Went with my gut. Later learned the budget vendor had a 30% defect rate in that batch.